Hi,
I found out that on an old Board using the TPD2S017 (TPD2S017DBVR) for USB ESD protection, the USB connector is connected to CH2_OUT/ CH1_OUT instead of CH2_IN / CH1_IN.
Is the board still protected?
Thank you,
Salvo
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
I found out that on an old Board using the TPD2S017 (TPD2S017DBVR) for USB ESD protection, the USB connector is connected to CH2_OUT/ CH1_OUT instead of CH2_IN / CH1_IN.
Is the board still protected?
Thank you,
Salvo