Other Parts Discussed in Thread: ADS6145,
Hello guys,
Good Day!
I am a masters student developing a measurement probe, I used ADS6145 analog to digital converter to covert my measured data, then used TLK2501 for parallel to serialization and again in the receiver probe,serial to parallelization but I have been confused with choosing proper Digital to Analog converter for this configuration. Which one will be parfect ,
My input is 14 bit Digital signal, I like to use analog supply voltage , AVdd=3.3 v,
Digital supply voltage, DVdd = 2.5 -3.3 v
I have already used AD9707 from Analog devices with 32 pin configuration , but could not get satisfactory output ,
I would be thankful if anybody could give some guidelines.
Kind Regards,
Asif