SN65HVD05: Difference of Propagation delay between single input to differential output and differential input to single output

user5013697

Part Number: SN65HVD05

Does SN65HVD05 have difference on Propagation delay between single input to differential output and differential input to single output?

I think Fig.4 and Fig.8 on Datasheet indicate the difference but it does not clear for me.

which Propagation delay spec should I refer for single input to differential output and differential input to single output?

Best regard

Yamane

over 8 years ago

0 Miguel Robertson over 8 years ago

TI__Guru 62920 points

Hello Yamane,

Yes, the propagation delays are different in each direction. The delay from single-ended input to differential output (i.e., in the "transmit" direction) is defined in the driver switching characteristics table, while the delay from differential input to single-ended output (i.e., in the "receive" direction) is defined in the receiver switching characteristics table.

Please let me know if you have any other questions on this device.

Best regards,
Max

0 user5013697 over 8 years ago in reply to Miguel Robertson

Intellectual 490 points

Hello Max,

I'm Clear thanks to your answer.
Thank you.

Best regads
Yamane

Interface

Interface forum

SN65HVD05: Difference of Propagation delay between single input to differential output and differential input to single output