TPD2E2U06-Q1: S-parameter

Masaoki Koide

Intellectual 580 points

Part Number: TPD2E2U06-Q1
Other Parts Discussed in Thread: TPD2E2U06,

Dear Sir,

Our customer would like to have S-Parameter Simulation Model to simulate impedance.

Could you please provide it?

Regards,

Koide

over 7 years ago

0 Cameron Phillips over 7 years ago

TI__Genius 12410 points

Koide,

I am working to get an S-parameter model for the TPD2E2U06.

Regards,

Cameron

0 Masaoki Koide over 7 years ago in reply to Cameron Phillips

Intellectual 580 points

Hi Cameron-san,

Thank you very much for your feedback.
When do you plan to get the S-parameter?

Regards,
Koide

0 Masaoki Koide over 7 years ago in reply to Masaoki Koide

Intellectual 580 points

Hi Cameron-san,

Could you please share us your schedule for TPD2E2U06-Q1 S-Parameter?

Your cooperation would be appreciated.

Regards,

Koide

0 Masaoki Koide over 7 years ago in reply to Masaoki Koide

Intellectual 580 points

Hi Cameron-san,

Could you please share us when you can provide us S-Parameter of TPD2E2U06-Q1?

Your cooperation would be really appreciated.

Regards,

Koide

0 Cameron Phillips over 7 years ago in reply to Masaoki Koide

TI__Genius 12410 points

Koide-san,

I apologize for the delay. I should have it to you by next week.

Regards,

Cameron

0 Masaoki Koide over 7 years ago in reply to Cameron Phillips

Intellectual 580 points

Cameron-san,

Thank you for your feedback.

I'm looking forward to hearing from you next week.

Regards,

Koide

0 Masaoki Koide over 7 years ago in reply to Masaoki Koide

Intellectual 580 points

Cameron-san,

How's the progress about S-parameter of TPD2E2U06-Q1?

Our customer is waiting for that.

I'm sorry to rush you.

Regards,

Koide

0 Masaoki Koide over 7 years ago in reply to Masaoki Koide

Intellectual 580 points

Cameron-san,

Would you please give us any feedback?

Our customer's simulation work is stopped due to the S-Parameter now.

The situation is not very good.

Your cooperation is really appreciated.

Regards,

Koide

0 Cameron Phillips over 7 years ago in reply to Masaoki Koide

TI__Genius 12410 points

Kodie-san,
I finally have the ability to run the test. I will give you the data very soon. It is high priority for me.

Regards,
Cameron

0 Masaoki Koide over 7 years ago in reply to Cameron Phillips

Intellectual 580 points

Cameron-san,

Thank you very much for the updates and your every effort for the S-Parameter.

I'm looking forward to sharing the data from you sooner !

Regards,

Koide

0 Masaoki Koide over 7 years ago in reply to Masaoki Koide

Intellectual 580 points

Cameron-san,

How's the progress about the S-Parameter?

We appreciate if you share the file within this week.

Regards,

Koide

0 Cameron Phillips over 7 years ago in reply to Masaoki Koide

TI__Genius 12410 points

Koide-san,

Had an issue because our analyzer did not have high enough frequency. I am going to borrow one to run the test for you.

Regards,

Cameron

0 Masaoki Koide over 7 years ago in reply to Cameron Phillips

Intellectual 580 points

Cameron-san,

Thanks for the feedback. I understand your situation.

Your prompt action would be appreciated.

Regards,

Koide

0 Cameron Phillips over 7 years ago in reply to Masaoki Koide

TI__Genius 12410 points

Koide-san,

Attached is the s-parameter model for the TPD2E2U06-Q1. This was taken from the EVM and it is important to note that this is for a typical device.

Let me know if you need anything else

1777.TPD2E2U06Q1.s2p

Regards,

Cameron

0 Masaoki Koide over 7 years ago in reply to Cameron Phillips

Intellectual 580 points

Cameron-san,

Thank you very much for sending the S-Parameter file. I deeply appreciate it.
I'm going to send the file to our customer.

Regards,
Koide

Interface

Interface forum

TPD2E2U06-Q1: S-parameter