SN65LVDM176: Pulse skew

na na78

Guru 16770 points

Part Number: SN65LVDM176

We can see typical pulse skew of driver and receiver as 0.2ns and 0.4ns by each.

Do you have max/min value of that?

It is no problem if it is just reference value (not guaranteed).

BestRegards

over 7 years ago

0 Jorge Llamas (SWAT) over 7 years ago

TI__Expert 7395 points

Hello,

Your question is being assigned to a support engineer. You should be getting a response soon.

Regards,

0 na na78 over 7 years ago in reply to Jorge Llamas (SWAT)

Guru 16770 points

Hi Jorge

Thank you.
I'm looking forward to hearing from you.

BestRegards

0 HA over 7 years ago in reply to na na78

TI__Intellectual 1810 points

Hi,

Sorry for this delayed response.

This parameter is for the magnitude (absolute value) of the difference between the high-to-low and low-to-high propagation delay. For a given unit, this parameter will change with voltage and temperature. We do not have min and max numbers due to voltage and temperature variation. Using data we have for similar devices, you can assume a minimum value of 0ns. For a maximum value, you can also use the maximum part-to-part skew of 1ns provided in the datasheet.

Best regards,

Hassan.

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Interface

Interface forum

SN65LVDM176: Pulse skew