• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 32 subscribers
  • Views 732 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65LVCP114: SDI - HDMI switch

Jason Lo
Prodigy 250 points
Part Number: SN65LVCP114
Other Parts Discussed in Thread: LMH0324

I am looking for a switch component that can output either an HDMI 2.0 input or a 3G-SDI input.  For the HDMI 2.0 case, only the TMDS lines would pass through the switch.  I found SN65LVCP114 and think it might work, but am not sure since I do not have much experience with 3G-SDI.  Can someone please advise on this or alternative solutions?

Thanks,

Jason

  • 0
    TI__Mastermind 43795 points

    Hi Jason,

    The SN65LVCP114 inputs and outputs are biased to a common mode of VDD-0.3V.  This voltage is inline with TMDS termination levels, at least in the older HDMI specifications. 

    Can you be more specific about the 3G-SDI input?  In many cases SDI signals are single-ended and/or AC coupled.  In general our high speed repeaters and muxes would be compatible with any AC coupled differential signal.

    Regards,

    Lee

  • 0 in reply to Lee Sledjeski
    Prodigy 250 points
    The 3G-SDI input would first go into an equalizer such as LMH0324, and then into the mux.