DS64BR401: EQ gain setting

Kawai

Guru 19775 points

Part Number: DS64BR401

Hi Team,

Please allow me to ask you about DS64BR401 EQ gain settings.

There is a gain table in the datasheet, however, the table is separated based on "GST" register settings.

When used in Pin Mode, can we ignore this GST register settings ?

Best Regards,

Kawai

over 7 years ago

0 Michael Lu (Santa Clara) over 7 years ago

TI__Mastermind 29655 points

Hi Kawai-san,

This device is a legacy repeater, so it will take us some time to reference our design documents. We will respond to you by 11/27 after we return from the US Thanksgiving Holidays.

Michael

0 Lee Sledjeski over 7 years ago

TI__Mastermind 43795 points

Hi Kawai,

Yes, when using pin mode for configuration it is okay to ignore the EQ register settings.

Regards,

Lee

0 Kawai over 7 years ago in reply to Lee Sledjeski

Guru 19775 points

Hi Lee-san,

Thanks for your support!

Best Regards,
Kawai

Interface

Interface forum

DS64BR401: EQ gain setting