RTOS/DS90UB964-Q1: FPDLink Hotplug Question

Ming Zhong9

Intellectual 380 points

Part Number: DS90UB964-Q1

Tool/software: TI-RTOS

Dear experts,

Does FPDLink support camera hotplug and reinit after that? Can we get the offline event through the registers?

I'm working on Automotive products.

Best Regards!

Zhong Ming

over 8 years ago

0 Hamzeh Jaradat over 8 years ago

TI__Guru** 115010 points

Hello,
The Deserializer itself does not initialize the Imager but the ISP or SoC is doing that through the Deserializer.
And yes, if a camera is plugged in the Deserializer will have LOCK high, the ISP or SoC can monitor that and use it as Hot plug for initializing the Imager.

Interface

Interface forum

RTOS/DS90UB964-Q1: FPDLink Hotplug Question