Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 443 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UR910-Q1: BIST mode

Kevin Xiong
Expert 2340 points
Part Number: DS90UR910-Q1

Hi,

I'm using DS90UR905Q-Q1 as serializer and DS90UR910-Q1 as deserializer. The serializer board is made by gerber file from TI's website and the deserializer board is DS90UR910QEVM.

When I use BIST function, is that possible that I do NOT write any register of 905 and 910 througn I2C? That means that all the registers have the default values.

Thanks.

Kevin Xiong