• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 317 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

SN65LBC173A: G and G/ enable question

SN65LBC173A: G and G/ enable question

Cris Qi
Intellectual 835 points
Part Number: SN65LBC173A
Other Parts Discussed in Thread: SN65LBC172A,

Hi，

What is the signal pulse width, signal pulse edge (in ns) of SN65LBC173A/SN65LBC172A.？

  • 0
    TI__Mastermind 25705 points
    Cris,
    We will take a look at the timing of the enable pins. What's your concern here? Do you want to know how fast the enable pins can be toggled?
    Regards,
    Hao
  • 0 in reply to Hao L
    TI__Guru 62920 points
    Cris,

    I think we are still a little confused on what you mean when you mention the signal pulse width. The enable controls of this device are static controls, so a single pulse would not force the device to toggle. If you are concerned about the time it takes for the device to become enabled/disabled after a state change on the enable lines, you may want to reference the tPHZ/tPLZ/tPZH/tPZL specifications.

    Max