Dear Team:
Our customer use LM8330, but got PWM issue as below/
Could you help the case?
Hi Thomas,
We have face some PWM problems. After we give the enable, on and dutycycle commands to LM8330, PWM will be pull high to 1.8v but it always stays at 1.8v. When we give other dutycycle commands to LM8330, PWM still stays at 1.8v.
It seems like the enable and on commands are work but the dutycycle command cannot control the PWM signal.
Are there any wrong steps in our command orders or there are some values and settings that we miss it?