TS3USB3000: Crate a 2x2 Cross Switch

Toralf Popp

Prodigy 90 points

Part Number: TS3USB3000
Other Parts Discussed in Thread: DS92LX1621

Hi, I'd like to use two of these High Speed switches as a "Cross-Switch".

1. Is it possible to connect the USB D lines of two Swiches to create a Cross Switch 2x2 ?

2. Is it copatible with Channel-Link III and / or FPD-Link III ?

Thanks

over 7 years ago

0 Brian Zhou over 7 years ago

TI__Guru**** 158025 points

yes, you can create Cross Switch 2x2 .

what speed of Channel-Link III and / or FPD-Link III ?

ZXL

0 Toralf Popp over 7 years ago in reply to Brian Zhou

Prodigy 90 points

Hi, we use Channel Link III DS92LX1621/22 with 10bit@48MHz PixelClock and FPD III DS90UB9013/14Q with 10bit@100MHz . I don't know the speed over the cable but assume to be at least 1.6GHz ?

0 Brian Zhou over 7 years ago in reply to Toralf Popp

TI__Guru**** 158025 points

for bandwidth, it should work.

Interface

Interface forum

TS3USB3000: Crate a 2x2 Cross Switch