DS80PCI102: Auto RX-detect

NAOKI AOYAMA

Guru 11215 points

Part Number: DS80PCI102

Hello,

Our customer use the DS80PCI102, have a question.

It has two way of the Auto RX-detect function.

Which way should the customer use?

Does it care about power consumption?

Best Regards,

Naoki Aoyama

over 7 years ago

0 Nasser Mohammadi over 7 years ago

TI__Guru* 93670 points

Hi Aoyama-San,
This depends on how fast the application requires remote RX to be detected. Default auto detect mode - testing every 12ms - is normally used by other customers.
Regards,,nasser

0 NAOKI AOYAMA over 7 years ago in reply to Nasser Mohammadi

Guru 11215 points

Hello Nasser-san,

Thank you for your reply.
I understood it depend on the requirement of the timing to be detected.

Thanks,
Naoki Aoyama

Interface

Interface forum

DS80PCI102: Auto RX-detect