DS10CP154A: LVDS 4x4 Crosspoint Switch running at RS-422 speeds

David Baker57

Part Number: DS10CP154A

Looking at DS10CP154A for a 4x4 crosspoint switch. Only need RS-422 speeds. Would keep signal levels within the datasheet LVDS input specs. Would the part run at 100 and 400 kHz speeds in pin mode?

over 7 years ago

0 Nasser Mohammadi over 7 years ago

TI__Guru* 93570 points

Hi David,
DS10CP104 is normally used at higher data rates but as you can see from DC measurement setup it can support all the way down to DC as long as electrical specifications are met.
Regards,,nasser

Interface

Interface forum

DS10CP154A: LVDS 4x4 Crosspoint Switch running at RS-422 speeds