HD3SS460: put HD3SS460 + HD3SS213 in series

K.Yaita

Part Number: HD3SS460
Other Parts Discussed in Thread: HD3SS213

Hi Team,

My customer is considering to use HD3SS460 for receiving display port1.2a signal from USB Type-C cable.
In addition, he also considers to put HD3SS213 for switching DisplayPort1.2a signal after HD3SS460 on his board.

I concern if it is possible to put passive switches (HD3SS460+HD3SS213) in series..
May I have your advice?

Best Regards,
Yaita

over 6 years ago

0 David (ASIC) Liu over 6 years ago

TI__Guru**** 156766 points

Yaita-san

Do you have a block diagram you can share showing the entire DP signal path?

Thanks
David

0 K.Yaita over 6 years ago in reply to David (ASIC) Liu

Guru 29710 points

Hi David-san,

Thank you for your support.
I can share my customer's schematic in offline.
Could you send me private message?

I will put my e-mail address if you can't.

Best Regards,
Yaita

0 David (ASIC) Liu over 6 years ago in reply to K.Yaita

TI__Guru**** 156766 points

Yaita-san

Please accept my friendship request.

Thanks
David

Interface

Interface forum

HD3SS460: put HD3SS460 + HD3SS213 in series