DS90UB954-Q1EVM: DS90UB954-Q1EVM

Suraj R

I have an LVDS Coaxial input (automotive) which needs to be converted to MIPI CSI2. Can I use DS90UB954-Q1EVM to take the coax LVDS input and get MIPI CSI2 as output? Are there any limitations?

over 7 years ago

0 Hamzeh Jaradat over 7 years ago

TI__Guru** 115050 points

Hello Suraj,

it depends what is the source of the LVDS signal? To work with the 954 it needs to be a compatible device.

0 Suraj R over 7 years ago in reply to Hamzeh Jaradat

Prodigy 80 points

Currently it works fine with a maxim deserialiser. So can I expect it to work with TI's above mentioned board?

0 Hamzeh Jaradat over 7 years ago in reply to Suraj R

TI__Guru** 115050 points

If it works with other manufacturer device, this means the Serializer on the source is from that manufacturer. If this is the case then it will not work with our devices.
Devices from different manufacturers are not compatible.

Interface

Interface forum

DS90UB954-Q1EVM: DS90UB954-Q1EVM