Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 32 subscribers
  • Views 477 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90LV047A: LVDS relay(Repeater) device

cafain
Mastermind 6535 points
Part Number: DS90LV047A
Other Parts Discussed in Thread: DS90LV048A, , DS10BR150, DS90LV804

HI,staff.

LVDS relay device

Repeater (buffer) between DS90LV047A and DS90LV048A
　In case of additional connection, please introduce a recommended device.

DS90LV047A(LVDS) ⇒　(LVDS)Repeater ⇒ (LVDS)DS90LV048A

・ Transmission speed 10Mbps
・ Transmission distance 200mm max
・ Ch number of channels 1 board for 8ch, 4ch or 8ch products

※We believe that the DS10BR150 can be used,
※Please tell me the recommended device. (Latest device)

best regards
cafain

  • 0
    TI__Genius 10250 points
    Hello Cafain,

    One option would be DS90LV804 which is a 4-channel buffer. Is there a reason you believe you need a buffer (repeater) between DS90LV047A driver and DS90LV048A receiver? For this rate and distance I wouldn't normally expect a need for a buffer. What do you mean by the "additional connection"? A diagram would be helpful.

    Regards,
    Yaser
  • 0 in reply to Yaser Ibrahim
    Mastermind 6535 points

    Hi, Yaser-san

    Thank you for your support.

    Looking at Figure17 in the data sheet, it was expected that this buffer would not be necessary.

    best regards

    cafain