DS100MB201: DS100MB201 DATA RATE

xiaowei chen

Intellectual 680 points

Part Number: DS100MB201
Other Parts Discussed in Thread: DS100MB203, DS100MB203EVK

Dear all:

If DS100MB201 data rate support 1Gbps? Can you support reference SCH? thank you!

over 5 years ago

0 John Hamilton1 over 5 years ago

TI__Intellectual 1885 points

Hello, Yes the DS100MB201 can support 1Gbps data rates. Make sure that the signals are AC coupled.

0 John Hamilton1 over 5 years ago in reply to John Hamilton1

TI__Intellectual 1885 points

Hello, No TI does not have a reference design / EVK for the DS100MB201. The DS100MB203 is a similar device and TI does have a reference design and EVK for this device. You can refer to the DS100MB203EVK User's Guide

0 user3587759 over 5 years ago in reply to John Hamilton1

Prodigy 40 points

Hello, I connet 1Gbps input signal and I confige RATE=0,TXIDLEDO/SO =float or 0，SD_TH= float , FAN OUT =0, and I capture the wave at input and output, find part waves are abnormal , if there are continus high or low at input , the outputs are exceed expectation , attach the wave

0 user3587759 over 5 years ago in reply to user3587759

Prodigy 40 points

green is the input and yellow is the output

0 Lee Sledjeski over 5 years ago in reply to user3587759

TI__Mastermind 43795 points

Duplicate post. Closing this one.
Regards,
Lee

Interface

Interface forum

DS100MB201: DS100MB201 DATA RATE