XIO2001EVM: XIO2001EVM Compliance test failed

David Xiang

Part Number: XIO2001EVM
Other Parts Discussed in Thread: XIO2001,

Hi,

XIO2001EVM is failed when PCIe compliance test with CBB card. It seems the transmitter level is not enough. How to adjust the level higher in XIO2001? Thank you.

over 5 years ago

0 Ikechukwu Anyiam over 5 years ago

TI__Mastermind 35130 points

Hi David,

There is not a way to adjust the level higher. Note that the XIO2001 is compliant to PCI Express Base Specification, Revision 2.0, so you should reference this specification for any compliance testing.

Regards,

I.K.

0 David Xiang over 5 years ago in reply to Ikechukwu Anyiam

Prodigy 130 points

hi I.K.

Still failed for PCIe Revision 2.0 compliance testing. Could you share any advice to improve?

0 Ikechukwu Anyiam over 5 years ago in reply to David Xiang

TI__Mastermind 35130 points

There's not really much you can do since you're using the EVM. The EVM wasn't meant to be used in compliance testing. You should use your own design/board for that.

Regards,

I.K.

Interface

Interface forum

XIO2001EVM: XIO2001EVM Compliance test failed