SN65C3221-Q1: AEC-Q100 qualification status

Mehmet Durna

Prodigy 90 points

Part Number: SN65C3221-Q1

Dear All and TI Experts,

In my application I need to use a AEC-Q100 qualified RS-232 translator. I have come up with the following TI parts:

SN65C3221IPWRQ1

TRS3223QPWRQ1

MAX3232EIPWRQ1

In their datasheets, they all say "Qualified for Automotive applications" However not explicitly identifed as "AEC-Q100".

Could anyone can tell its AEC-Q100 status? Is it fully qualified, or only partially comply with AEC?

Best regards,

Mehmet DURNA

over 5 years ago

0 Eric Hackett over 5 years ago

TI__Guru 69972 points

Mehmet,

I just checked the qualification reports, and these devices were qualified as per AEC-Q100 in 2012-2014. I believe at that time the revision was AEC-Q100 rev. G, and the current revision is rev. H. That being said, these devices are indeed compliant with AEC-Q100.

Please let me know if you have any more questions or concerns.

Regards,

0 Mehmet Durna over 5 years ago in reply to Eric Hackett

Prodigy 90 points

Dear Mr. Hackett,

Many thanks for this information, it helped a lot.

Is it possible that we can have the qualification reports of the device, for us to declare it to our customer?

Thanks for your efforts, best regards,

Mehmet

0 Eric Hackett over 5 years ago in reply to Mehmet Durna

TI__Guru 69972 points

Mehmet,

If you go to the Quality Summary page, you can type in the part number in the search box and get the quality summary for that device. If that is not enough for the customer, you can email me directly and we can figure out what to do. You can find my email by clicking on my username.

Regards,

0 Mehmet Durna over 5 years ago in reply to Eric Hackett

Prodigy 90 points

Dear Eric,

Many thanks for your helps. We will ask this to the customer and maybe bother you once they need more info.

Thanks alot.

Best regards,

Mehmet DURNA

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Interface

Interface forum

SN65C3221-Q1: AEC-Q100 qualification status