SN65DSI86: SN65DSI86 clock source from DACP/N

Hugo

Please refer to Table 1 of the DSI86 datasheet.

Please also note when using the REFCLK as the clock source, any DSI Clock frequency is supported, but if the clock source was instead the DSI A clock, then the required DSI Clock frequency would need to change to a frequency supported by the DSI86. When operating in this mode, any one of the following DSI A clock frequencies can be used: 384 MHz, 416 MHz, 460.8 MHz, 468 MHz, or 486 MHz.

Thanks

David