TUSB321AI: TUSB321AI: UFP configuration

I don't think I receive it, can you send again? or just send with private message on E2E.

private message on E2E send.

Br.

my comment for UFP application:

1: You missing AC cap for HD3SS3212, normally on TX pin close to Type-C connector.

2: For TUSB321,  prefer separate supply for VDD, like VSYS.

3: does Out1/Out2 connect to 1.8v IO?

Dear Brian,

1)  we have the TX caps, C338, C339, C442, C443 or i'm wrong?

we have first the connector -> ESD Diode -> CMC -> TX capacitors-> mux HD3SS3212

2) what if the whole system is only supplied with VBUS  will then the TUSB321 present it self as device so the the host supply the 5V on VBUS?

3) yes OUT1/OU2 are connected to 1.8V logic on processor.

Best Regards,

David.