• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 228 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ONET4201LD: ONET4201LD

benpsu99
Prodigy 20 points
Part Number: ONET4201LD
Other Parts Discussed in Thread: ONET4201PA,

I am new to DFB and FP laser designs. I am designing an SFP like product. Do you have any reference designs using ONET4201LD and ONET4201PA? On the RX side I would be using a PD. It is for an ethernet application at 1.25Gbps. Any suggestions? Yes besides using an existing SFP which is not an option. I have a custom form factor that requires a new design. Thank you.

  • 0
    TI__Guru* 93670 points

    Greetings,

    ONET4201LD and ONET4201PA are very closely coupled with the laser or the receiver(ROSA) that you would be using. At the moment, we do not have a reference design for these two devices. It is recommended to follow application example such as what is shown in ONET4201LD data sheet figure 24.

    Regards,, Nasser