Hi
we are using TLK10031 device in our design. Our board is going for assembly in two weeks. Plz provide us the Reflow recommendations to be followed for this device.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi
we are using TLK10031 device in our design. Our board is going for assembly in two weeks. Plz provide us the Reflow recommendations to be followed for this device.
Hi,
Refer to the TI BGA application note per link below, Section 6.6 "Reflow".
http://www.ti.com/lit/an/snoa021c/snoa021c.pdf
Cordially,
Rodrigo Natal
HSSC Applications Engineer