use GPIOxx as MISO from multiply devices

Evgeniy Fedosov

Other Parts Discussed in Thread: USB2ANY

Hi everybody!

I have a question about USB2ANY GPIO pins. Can I use them as SPI MISO inputs from several devices?

0 Evgeniy Fedosov over 5 years ago

And some errors in p-channel MOSFET drawing at page 12 snau228.pdf:

0 Tamara M Alani over 5 years ago in reply to Evgeniy Fedosov

Hi Evgeniy,

Thank you for your post. Which EVM are you using the USB2ANY with?

-Tamara

0 Evgeniy Fedosov over 5 years ago in reply to Tamara M Alani

Hi Tamara!

No, we will use with device our own design.

In my opinion, there is no differences between use USN2ANY with EVM or other devices.

Regards, Evgeniy

0 Evgeniy Fedosov over 5 years ago

Can anybody help me with my issue?

0 Evgeniy Fedosov over 5 years ago in reply to Evgeniy Fedosov

OK..

My problem have been solved with dip switch like that:

MOSI and Clock signal is common for all slaves, #CS and MISO selected through dip switch.

Interface forum