Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 260 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

DS280DF810EVM: Looking for the Sigcon profile for the DS280DF810EVM

DS250DF810EVM: DS250DF810EVM Configuration

Tom Roe68
Prodigy 130 points
Part Number: DS250DF810EVM
Other Parts Discussed in Thread: DS250DF810, , LMH1218

I am using SigCon on the DS250DF810EVM. It comes up connected on 0x30 but it reads that the device is a LMH1218 and not DS250DF810. I added a device as per the guide but it does not appear in device model drop box. I can toggle the LED so it sees the controller. I need help to figure how I can make SigCon see the DS250 device? SigCon version is 2.0.0.8, 5/12/16. Running Windows 10. Thanks