• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 227 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

HD3SS3220: DISABLE _UFP _ACCESSORY interpretation

Takahiro Saito
Expert 5455 points
Part Number: HD3SS3220

Hi team,

I’ｍ wondering about the interpretation of DISABLE _UFP _ACCESSORY register.

This register intend for determining whether HD3SS3220 detects accessory or not when the HD3SS3220 is UFP mode, is that correct?

Regards,

Saito

  • 0
    TI__Guru 64326 points

    Hi Satio-san,

    ATTACHED_STATE and ACCESSORY_CONNECTED are the registers used to determine whether or not a device or accessory is connected in UFP (and DFP/DRP) mode. DISABLE _UFP _ACCESSORY is used to stop UFP from connecting to or acting as a debug accessory. Depending on the application Accessory Support can be restricted.