DS90UB954-Q1EVM: configuration

Hanno Reimer

Intellectual 1920 points

Part Number: DS90UB954-Q1EVM

Our test structure would be as follows:
1. camera
2. Ser EVM (953A)
3. DeSer EVM (954)
4. Nvidia Jetson TX2
We know that the camera and the embedded board work together. (CSI-2, I²C and power coming in on the patch cord)
Does the 953/954 still have to be configured or do we only need to set the jumpers correctly to pass the video data through?
If configuration is necessary, are there standard configurations available?
We are interested in estimating the effort of programming.

over 5 years ago

0 Nicholas Darash over 5 years ago

TI__Mastermind 18755 points

Hello,

I'd like to turn you to the 954 EVM's user guide that can be found at this link http://www.ti.com/lit/ug/snlu223a/snlu223a.pdf. Here you will find a quick start guide, standard configurations, and information on how to use our interface software (Analog LaunchPAD). Also you should checkout the app note for designing a system using the 953/954 found here http://www.ti.com/lit/an/snla267a/snla267a.pdf. There is a lot of useful information in here as well including some software examples.

Regards,

Nick

Interface

Interface forum

DS90UB954-Q1EVM: configuration