Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 2 answers
  • Subscribers 32 subscribers
  • Views 284 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65LVDS105: Minimizing EMI radiation on output pins

Leo Chow
Expert 3120 points
Part Number: SN65LVDS105

Hi,

I have a question with regards to SN65LVDS105.

In our circuit, there is a 25Mhz clock at the input pin but if we want to totally disable all the output. To minimise any EMI radiation and unwanted current flow, how should we terminate the unused output pin for SN65LVDS105? WIll pulling all output pins to Gnd be the best approach?

Regards,

Leo