Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 188 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65LVCP408: Lower Cost Solution/Part Recommendation

Go Bravos
Expert 6090 points
Part Number: SN65LVCP408
Other Parts Discussed in Thread: DS40MB200

Team,

I'm looking for a part or parts to receive 4 CML pairs and drive out two copies of each input (8 pairs output). Initially, I was looking at the SN65LVCP408, but I was wondering if a lower cost solution might be achievable. The data rate is 3.1875, but I would like to have some margin on this in case of requirements change.
The part would need to be industrial temperature and have at least 5 years of active production.

From what i can tell the SN65LVCP408 appears to be the best fit. Perhaps the DS40MB200 could also be a fit? Please let me know your thoughts.

Thank you.