This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
My customer would like to place an EVM to test for TPD4S012 to check the parameters if falls in the range datasheet deliver..
But there are several evaluation module on our website, could you please let me know which one should customer pick to test on?
Thanks!
Best Regards,
Patty Chuang
Hi Patty,
Welcome to E2E!
To test the ESD capabilities of the device the customer should order the "Generic ESD Evaluation Module". Click on this link to go directly to the product folder.
Best regards,
Andy Robles