DS90CF386: 18-bit LVDS to Parallel Bit Mapping?

Paul Bartek

Part Number: DS90CF386

Hello,

Does the DS90CF386MTD/NOPB support 18-bit LVDS? Attached is a schematic showing how I currently have it interfaced to a 24-bit RGB display.

Can you please review and let me know if this is acceptable?

6232.Schematic Prints.pdf

over 4 years ago

0 Casey McCrea over 4 years ago

TI__Guru** 103215 points

Hello Paul,

For 18bpp, typically the LSB on RIN3+/- format is used and RIN3+/- is left disconnected. So I suggest reworking your connections such that the RGB mapping matches table 2 of the datasheet. This is also described on page 24 of the datasheet for reference

Best Regards,

Casey

0 Paul Bartek over 4 years ago in reply to Casey McCrea

Prodigy 20 points

Hi Casey,

This resolved my issue, thanks a lot!

Interface

Interface forum

DS90CF386: 18-bit LVDS to Parallel Bit Mapping?