THVD2410: May we have RJ45 to RS485 converter reference circuit?

Chen Bogey8

Mastermind 9990 points

Part Number: THVD2410
Other Parts Discussed in Thread: TIDEP0079

Hi Sir

May we have RJ45 to RS485 converter reference circuit?

what we need to notice when we design it? DE/RE pin will control by outside CPLD.

Bogey

over 3 years ago

0 Danny Bacic over 3 years ago

TI__Mastermind 26446 points

Bogey,

I'm not sure I completely understand the application you're looking for. Do you mean you intend to transmit RS-485 signals over an RJ45 connector?

You can find our RS-485 & RS-422 reference designs here. I know that TIDEP0079 uses an RJ45 connector, but the THVD2410 does not have any reference designs specifically for that part at the moment.

Best,

Danny

0 Chen Bogey8 over 3 years ago in reply to Danny Bacic

Mastermind 9990 points

Hi Sir

I add customer block. may you you know how to connect from RJ45 to RS485? have suggestion part?

RS485.docx

0 Hao L over 3 years ago in reply to Chen Bogey8

TI__Mastermind 25705 points

Bogey,

Do you know what signal runs on the RJ45? It looks like the RS485 (THVD2410) needs to convert RS485 signal to Continuity_I and coverts Continuity_O back to RS485. If so, RJ45 connects to the A/B pins of THVD2410, while R=Continuity_I, D=Continuity_O.

Regards,

Hao

Interface

Interface forum

THVD2410: May we have RJ45 to RS485 converter reference circuit?