TS3USBA225: D+/R and D-/L Abs Max in Power Down Mode

Jon Key

Part Number: TS3USBA225

Hi Team,

Could you confirm the abs max of the D+/R and D-/L pins in power down mode? Could they tolerate seeing 5V on the input in power down mode? This is not mentioned in the datasheet, but the abs max of D0+,D0-, D1+, D1-, R and L are shown.

Thank you,

Jon

over 4 years ago

0 Brian Zhou over 4 years ago

TI__Guru*** 128980 points

yes it' s 5v too

0 Jon Key over 4 years ago in reply to Brian Zhou

TI__Intellectual 920 points

Hi Brian thanks for the response.

Can the mux also tolerate 5V on D+/R and D-/L when it is in the MHL/USB Mode 2 without damaging the device?

Thank you,

Jon

0 Brian Zhou over 4 years ago in reply to Jon Key

TI__Guru*** 128980 points

sorry, just comfirmed . Max voltage on these signal pins is 4.3v, not 5v

Interface

Interface forum

TS3USBA225: D+/R and D-/L Abs Max in Power Down Mode