TUSB1064RNQEVM: TPS65982 config and firmware

Heath Holcomb

Prodigy 20 points

Part Number: TUSB1064RNQEVM
Other Parts Discussed in Thread: TPS65982

Can I get the config and firmware for the TPS65982 used on this EVM board?

over 3 years ago

0 Brian Zhou over 3 years ago

TI__Guru** 119425 points

firmware is already in TPS65982.

You can find default config from EVM user guide, .The configuration settings may need to be optimized depending on the amount of loss of each channel in the system

0 Heath Holcomb over 3 years ago in reply to Brian Zhou

Prodigy 20 points

There are no details about the TPS65982 in the user guide (SLLU278), only jumper settings for the TUSB10646. I'm looking for the project files that would be used in the Application Customization Tool for the TPS65982. I'm specifically looking for the Type-C DispalyPort alt mode PD settings.

0 Brian Zhou over 3 years ago in reply to Heath Holcomb

TI__Guru** 119425 points

let me check since it's a very old design

0 Brian Zhou over 3 years ago in reply to Brian Zhou

TI__Guru** 119425 points

pls. accept my friendship request

Interface

Interface forum

TUSB1064RNQEVM: TPS65982 config and firmware