TPD5S115: Footprint Information Clarity Required

Chithambara Ganesh57

Intellectual 490 points

Part Number: TPD5S115

Hi Team,

In Datasheet of TPD5S115, it is mentioned that Pin out as below,

And there is no Footprint or Recommended Land pattern in Datasheet.

But from the attached document (www.ti.com/.../mxbg096w.pdf), i am able to find the Recommended Land Pattern as below,

mxbg096w.pdf

over 7 years ago

0 Brian Dempsey over 7 years ago

TI__Intellectual 2225 points

Hi,

We are working on updating the datasheet to reflect the information this additional information. Thank you for bringing this to our attention.

Very Respectfully,
Brian Dempsey

0 Chithambara Ganesh57 over 7 years ago in reply to Brian Dempsey

Intellectual 490 points

Hi Brian,

Thanks for the reply,

May i know when it will get reflected in Datasheet?

Can you please tell which Footprint i have to follow to proceed now?

Thanks,
Ganesh.

0 Brian Dempsey over 7 years ago in reply to Chithambara Ganesh57

TI__Intellectual 2225 points

Hi Ganesh,

There is a process associated with updating information in a preexisting datasheet, so I can not give a definitive answer on when you will see the update. As for the footprint, the one shown above with dimensions has the same package code, so this can be used. I apologize that this information is not in the datasheet, and I will let you know when the change has been implemented.

Very Respectfully,
Brian Dempsey

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Interface

Interface forum

TPD5S115: Footprint Information Clarity Required