Hi,
We are evaluating TMDS181 as sink.
We tried to pulg and unplug signal cable, then TMDS181 output invalid signal.
It happens once a twenty times.
The follwing are our setting and condition.
Signal Source = 1920x1080@60Hz from Signal generator.
MISC_CONTROL_09H = 0x06
MISC_CONTROL_0AH = 0xb1
MISC_CONTROL_0BH = 0x00
MISC_CONTROL_0CH = 0x61
And we don't write '1' to Apply_RXTX_CHANGES, because we don't change register value between pulg and unplug.
Could you tell me anything advice or comment?
Thank you