Compatibility of DS90UB933 and DS90UB954

Minho Won

I want to try the predefined evaluation board with DS90UB933 to interface with DS90UB954. Unfortunately, The output of DS90UB954 is MIPI and the serializer's input is RAW 10 or 12 bit. I'd like to know how I can configure that bit ordering or their compatibility.

over 8 years ago

0 Sean Thornton1 over 8 years ago

TI__Expert 5210 points

Hello Minho,

No default register configuration should be needed as the 954 will accept serial stream coming from 933 which has RAW serialized data.

-Sean

0 Minho Won over 8 years ago in reply to Sean Thornton1

Prodigy 120 points

Thanks for your response. My concern is that the input to 933 is raw RGB, and 954 recovers it and outputs MIPI. That conversion looks too ambiguous to me. For example, what will happen if I supplied 933 with YUV?

Interface

Interface forum

Compatibility of DS90UB933 and DS90UB954