SN65LVDT100: Restart time (Power OFF -> Power ON) and Power restart Voltage (required falling voltage)

Yuichiro Kimura

Part Number: SN65LVDT100
Other Parts Discussed in Thread: SN65LVELT23, SN65LVDT101,

Hellow support team

I have two questions.

1. When restarting the SN65LVDT100, SN65LVDT101 and SN65LVELT23, how much required time from power OFF to power ON ?
My customers are considering operations at less than 1 ms.

2.When turning on the power after turning off the power (SN65LVDT100, SN65LVDT101 and SN65LVELT23), what voltage is required falling voltage?
The customer is considering lowering it to 1V.

Best Regards,
sopatopa

over 7 years ago

0 Yaser Ibrahim over 7 years ago

TI__Genius 10250 points

Hello,

There shouldn't be any problem with having ~1 msec between power off and power on. Also, there is not a specific requirement of how low the voltage needs to be. However, please notice that the device output will be undetermined during that period.

Regards,
Yaser

0 Yuichiro Kimura over 7 years ago in reply to Yaser Ibrahim

Intellectual 480 points

Hello,Yaser

Thaks for your reply.
I will explain this information to customers.

Best Regards,
sopatopa

Interface

Interface forum

SN65LVDT100: Restart time (Power OFF -> Power ON) and Power restart Voltage (required falling voltage)