• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 13 subscribers
  • Views 405 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ISO1640: Simulation model for ISO1640

Meenalochini D
Prodigy 150 points

Part Number: ISO1640

Hi Team,

We were planning to use ISO1640 part for Bi-directional open drain GPIO signals.

I would like to simulate the device functionality using simulation.

Request you to share the simulation model for ISO1640.

Regards,

D.Meenalochini.

  • 0
    TI__Genius 17100 points

    Hi D.Meenalochini,

    Thank you for posting to the internal forums! This device's IBIS model can be found in the "Design Tools & Development" section of its product page on TI.com as shown below or through this link: 



    IBIS models can be used to model I/O behavior and characteristics -- we do not have PSpice models available for this device. Please let us know if there are any additional questions.


    Thank you,
    Manuel Chavez