• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 14 subscribers
  • Views 477 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TIDA-010232: reference design board

TIDA-010232: Combo compatibility

Rubén Clavero Yebra
Prodigy 20 points
Part Number: TIDA-010232

Dear Team,

We are considering the TIDA-010232 reference design in a new project and we would like to know if it complies with Combo. Could you tell us?

Many Thanks,

Rubén C.

  • 0
    TI__Expert 4040 points

    Hi Ruben,

    We do not certify our reference design to any standards, since TI is a chip manufacturer and we cannot guarantee for system performance.
    Obviously, we try to make our reference designs in a way that they can pass relevant standards, but they need to be evaluated and certified by each customer on their own.

    Best regards,

    Andreas

  • 0 in reply to Andreas Lechner
    Prodigy 20 points

    Hi Andreas,

    I understand that you do not certify your reference design and, of course, we are responsible for certifying it. However, could you tell me if, when you say relevant standards, you mean the Combo standard to which I referred, please?

    Thank you for your support.

    Best regards,

    Rubén C.

  • +1 in reply to Rubén Clavero Yebra
    TI__Expert 4040 points

    Hi Ruben,

    As mentioned in the design guide, we considered IEC 61557-8 and IEC
    61851-23.

    Best regards,

    Andreas