• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 13 subscribers
  • Views 341 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PSPICE-FOR-TI: Simulation_error

Ganesh V
Prodigy 120 points
Part Number: PSPICE-FOR-TI


Am planning to use Pspice for TI simulation tool to evaluate my design.

I installed recently with proper activation code.

Am unable to Run the simulation on my circuit.

That "Run" not popped up.

Requesting for resolve.

 

  • +1
    TI__Mastermind 20460 points

    Hi Ganesh,

    Have you setup your sim profile?

    There are a number of videos available to help you get up to speed on PSpice for TI.

    One super easy thing to do is run an existing reference design. If you have a particular area of interest, say DC-DC converter, like a buck or LDO. Use a part search to find a part that fits your needs and put that part # into the search. You'll find the part, and from there, select the reference design.

    The sim profile and biasing will already be setup. 

    David