This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN6501 single output

Other Parts Discussed in Thread: SN6501

I would like to confirm the transformer of single output for SN6501.

Can we use the transformer with single output?

And if we can, could you please teach the turn ratio for IN/OUT: 5V/5V?

Best regards,

Atsushi Yamauchi

  • Hello Yamauchi,

    SN6501 is a push-pull PWM controller and hence it needs a center-tapped windings at both input & output for its operation. If the secondary winding has to be made a single winding without a center-tap, even the primary has to be made a single winding which eventually would become nothing but a Flyback topology.

    Regards,
    Koteshwar Rao