• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 13 subscribers
  • Views 836 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ISO7310FC internal modulation frequency

Jani Isoo
Intellectual 2300 points

Other Parts Discussed in Thread: ISO7310FC

Hi,

Could you please advice the internal modulation frequency used inside the ISO7310FC so we can assess the potential impact.

 

Thanks,

Jani

  • 0
    TI__Intellectual 2200 points
    Hi Jani,

    In the ISO7310, an oscillator is used to set the time scale of the DC/PWM channel - the time base is 20ns. However, this frequency won't reflect in the output spectrum.

    The PWM modulated communication is packetized. The packets repeat every 8us. The packet structure has a custom header and tail, and the body of the packet has the sampled low frequency information of all the channels. The smallest pulse width inside the PWM packet is ~20ns.

    It is difficult to define a value for the carrier frequency for the PWM path. The noise is very randomized at the output.

    However, our recent capacitor isolators including the ISO73xx, are very quiet in general. I have sent you the emissions test results of ISO73xx and other devices over email. Chances of interference to external circuits are very small.

    Rgds,
    Anant