ISO3086: Half duplex use ?

PRAHLAD Supeda

Expert 5195 points

Part Number: ISO3086
Other Parts Discussed in Thread: ISO1410

Can ISO3086 be used as half duplex by shorting A & Y (11,14) and B & Z (12,13) pins ?

over 5 years ago

0 Lucas Schulte9 over 5 years ago

TI__Expert 6955 points

Prahlad,

Yes you can do this however it is optimal if you were to use a half-duplex transceiver. Have you seen the ISO1410? It's our latest isolated half-duplex transceiver.

Respectfully,
Lucas

0 PRAHLAD Supeda over 5 years ago in reply to Lucas Schulte9

TI__Expert 5195 points

Lucas,
Thanks for confirmation. ISO3086 is on the board & customer wants p2p footprint, half duplex part instead of ISO3086 or willing to use ISO3086 in half duplex as indicated earlier. Do you have any p2p footprint half duplex alternate suggestion ?

0 Lucas Schulte9 over 5 years ago in reply to PRAHLAD Supeda

TI__Expert 6955 points

Prahlad,

Unfortunately we do not have a half-duplex isolated transceiver that is pin to pin compatible with the full duplex versions. However, the packages are the same and the pin difference is minimal.

Respectfully,
Lucas

Isolation

Isolation forum

ISO3086: Half duplex use ?