• State TI Thinks Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 13 subscribers
  • Views 501 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ISO1430: About ISO14xx certifications

Yuto Sakai
Mastermind 6100 points
Part Number: ISO1430


Hi,

“All certifications planned” is written on data sheet P.1.
Is there any information about the progress of certification or the future prospect?

Best regards,
Yuto Sakai

  • 0
    TI__Expert 6195 points

    Hi Yuto, 

    Thanks for asking this on E2E. My apologies that we do not have this information already captured in the datasheet. 

    I just discussed this with our resident certifications expert on the team. We have several of these certifications already, but we need more time for those changes to be reflected in the datasheet. If there is a specific certificate you are looking for I may be able to share this with you privately offline in the meantime.

    Which certificate do you need?

    Do I have your permission to contact you via the email you used on your E2E account?

    Best regards, 

    Dan

  • 0 in reply to Dan Kisling
    TI__Expert 6195 points

    Hi Yuto, 

    I haven't head from you in a day or so. Were you able to determine which certificates you need?

    Best regards, 

    Dan

  • 0 in reply to Dan Kisling
    Mastermind 6100 points

    Hi Dan-san,

    I'm sorry for late reply.
    I am asking the customer for the necessary certificate.

    Could you tell me which certificate is available to us?
    There is no problem in contacting by email.

    Best regards,
    Yuto Sakai

  • 0 in reply to Yuto Sakai
    TI__Expert 6195 points

    Hi Yuto, 

    Sorry for the delay in response. 

    We have the UL, TUV, CQC, and VDE (reinforced) certificates and those updates should be in the datasheet soon. 

    I'll send you an email shortly. 

    Best regards, 

    Dan