UHF RFID reader PCB antenna

Srikanth R

Hi,

Can I use antenna in below link with UHF RFID reader?

http://www.ti.com/lit/an/swra227e/swra227e.pdf

Also, can I use any normal UHF antennas for RFID reader application? How are RFID antennas different from normal antennas?

Regards

Srikanth

over 9 years ago

0 Josh Wyatt over 9 years ago

TI__Guru* 91206 points

normally for UHF RFID, patch antennas are used (right hand, left hand circular polarized and also linear ones) - difference between these and the antenna you pointed out and others like monopoles, is directivity and handling different tag orientations, which the use case normally is needing.

Generally, RHCP and LHCP antennas will provide interop with tags is various orientations but less range than linear antennas, which will provide very directed longer range operations with tags in one orientation.

0 Srikanth R over 9 years ago in reply to Josh Wyatt

Expert 2650 points

Hi,

Are there any reference designs from TI (or others) for RHCP and LHCP antennas?

Regards
Srikanth

0 Srikanth R over 9 years ago in reply to Srikanth R

Expert 2650 points

Hi,

Is it possible to implement LHCP & RHCP on PCB antenna?

Regards

Srikanth

/etc... RF (Read-Only)

/etc... RF (Read-Only) Forum

UHF RFID reader PCB antenna