• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 14 subscribers
  • Views 605 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN470R1B1M - Using SCI3 with interrupts

Prasad Go
Prodigy 135 points

Other Parts Discussed in Thread: TMS470R1B1M

I am tyring to implement SCI3 in TMS470R1B1M using interrupts. IAR files form the installation (iotms470r1b1m.h) don't have CIM_SCI1RX and CIM_SCI1TX. Do you have any examples of this usage?

Prasad

  • 0
    TI__Guru 62930 points

    Prasad,

    This post was lost and unfortunately missed.

    Do you still need information on using SCI?  There is some information on using SCI in firmware for the HEATEMV.

    http://www.ti.com/tool/heatevm?keyMatch=heatevm&tisearch=Search-EN

    Regards,

    Wade