regarding unused pins termination-:
1) Unused output can keep open.No need to have pull-up or pull down.Is it right?
2)Unused inputs can we tied directly to GND or do we have to use some resistor lets say 20kohm to pull-down?Please confirm
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
regarding unused pins termination-:
1) Unused output can keep open.No need to have pull-up or pull down.Is it right?
2)Unused inputs can we tied directly to GND or do we have to use some resistor lets say 20kohm to pull-down?Please confirm
Hey Smita,
Yes, you can leave unused outputs open. It is also fine to terminate unused inputs directly to GND, no resistors are needed for this.