• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 18 subscribers
  • Views 181 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CD54AC244: pin-to-pin skew

Renan Santos Adriano
Mastermind 18795 points
Part Number: CD54AC244

Hello Team,

My customer is using the 54AC244 for clock distribution, but could not find in the datasheet the pin-to-pin skew.
Does the 54AC244 part have that characterized parameter?

Regards,

Renan

  • 0
    TI__Guru* 96722 points

    Hi Renan,

    No, standard logic devices (ie SN74 or SN54 part numbers) don't usually have skew and jitter defined or characterized.

    Typically you can expect to have less than 1ns of channel-to-channel skew within a single device.

    For devices with defined skew and jitter, please see the TI Clock & Timing portfolio of parts.